If your company network is having problems and you need to troubleshoot it, you also need to know some basic information about the computers on the network. Internet Protocol is the underlying ...

When your sign up for Internet access on behalf of your company or purchase Web hosting for your company's Web servers, you will purchase either a dynamic IP address, a single static IP address or a ...

OK, so I have a subnet (192.168.11.0) that currently has all servers and clients on it. It's running out of addresses. So, I create a new subnet (192.168.12.0) and change my DHCP server (Fortigate ...

The mask Class A subnet masks must start with 255.0.0.0 at a minimum, because the whole first octet of an IP address (the IP address describes the specific location on the network) is used to define ...

Subnet Mask divides the IP address into two segments and informs the computer which part is the network bit and which one is the host bit. For example, if there is an IP address: 192.168.0.1, it will ...

This is the first of many technical blog posts I’m going to post on IPv6 architecture and implementation for a Microsoft Windows-based environment. I started off with a basic introduction of the IPv4 ...

Subnetting a Class C network can be a tricky process to master. From MCSE to CCNA to RHCE to CNE, you'll have to know it and know it well. Todd Lammle walks you through clear instructions and ...

There are a few culprits that regularly contribute to delayed or failed IPv6 deployment projects, such as poor DNS planning, insufficient testing, unanticipated application behavior, and poor IPv6 ...

Although domain controllers can be configured to obtain an IP address from DHCP, it’s best practice to configure a static IP address so that it can be reliably discovered across the network. You may ...

Interesting one for you all. Just set up Exacq NVR with IP cameras and a network speaker but the speaker IP was incorrectly configured and sits on a different subnet. All devices sit on the same ...